The TC series is a line of products made of thermal interface silicone rubbers which offer superior electrical insulation. Special fillers have been added to boost heat-dissipating performance. The products of Low-hardness TC series are elastic, have good adhesion to heating elements and heat-sinks, and offer highly effective heat dissipation.
These products have superior thermal conductivity, elasticity, and adhesiveness (Low-hardness type), so they offer highly effective heat dissipation.
| Application/Type | Grade | Thermal conductivity W/mK |
Features | ||
|---|---|---|---|---|---|
| ISO 22007-2 |
ASTM E 1530 | ||||
| High-hardness Thermal Interface Silicone Rubber |
Sheet Type |
TC-A | 0.8 | 1.1 | General purpose. Thickness: 0.20, 0.30, 0.45, 0.80 mm |
| TC-CG | 1.7 | 1.9 | |||
| TC-EG | 3.1 | 4.5 | High thermal conductivity. Thickness: 0.20, 0.30, 0.45 mm |
||
| TC-BG | 7.3 | 5.0 | High thermal conductivity. Thickness: 0.20, 0.30, 0.45, 0.80 mm |
||
| TC-15CG-5HSV | 1.5 | - |
|||
| TC-15TCI | 0.6*2 | 1.2*2 | High insulation. | ||
| Cap Type |
TC-A-CP | 0.8 | 1.1 | General purpose. Thickness: 0.30, 0.45, 0.80 mm |
|
| TC-C-CP | 1.8 | 1.5 | Medium thermal conductivity. Thickness: 0.30, 0.45, 0.80 mm |
||
| TC-S2-CP | 2.0 | 2.0 | High thermal conductivity. Thickness: 0.30, 0.45, 0.80 mm |
||
| Tube Type |
TC-A-KT | 0.8 | 1.1 | General purpose. Thickness: 0.30, 0.45, 0.80 mm |
|
| Thermal Interface Silicone Soft Pads |
TC-HSV-1.4 | 1.2 | 1.4 | Single layer. | |
| TC-TXS | 3.3 | 5.0 | Single layer. | ||
| TC-TXS2 | 3.3 | 5.0 | Single layer. | ||
| TC-TXE | 3.3 | 5.0 | Double layer. | ||
| Thermal Interface Silicone Ultra Soft Pads |
TC-SP-1.7 | 1.5 | 1.7 | Double layer. Exceptional flexibility (hardness: 2 [Asker C]). |
|
| TC-SPA-3.0 | 2.3 | 3.0 | Single layer. Exceptional flexibility (hardness: 4 [Asker C]). |
||
| TC-CAS-10 | 1.8 | - |
Excellent cost performance. | ||
| TC-CAB-10 | 2.3 | - |
|||
| TC-CAD-10 | 3.2 | - |
|||
| TC-CAT-20 | 4.5 | - |
|||
| Double Sided Thermal Interface Silicone Tapes |
TC-10SAS | 1.0*1 | - |
Strong and stable adhesive strength without screws. | |
| TC-20SAS | 1.0*1 | - |
|||
| Thermal Interface Phase Change Materials |
PCS-LT-30 | 3.0*1 | - |
Low thermal resistance. | |
| PCS-CR-10 | 2.0*1 | - |
Low thermal resistance, Electrically insulated. |
||
| Electromagnetic Noise Suppression and Thermal Interface Silicone Rubber Sheets |
EMI-TC803 | 2.5 | 3.5 | Suppresses noise while improving heat dissipation. | |
*1 Measured by laser flash method. *2 Calculated values.
In-vehicle module which particularly long-term heat cycle reliability and vibration reliability are required
| Grade | Thermal conductivity W/m?K | Thermal resistance cm2?K/W |
|---|---|---|
| ISO22007 | 50°C/100 psi ASTM D5470 | |
| TC-SET4-20 | 4.5 | 1.08 |
Test Method
1) 3 mm thickness pad was cut to 20 x 20 mm size, and sandwiched by polyimide films.
2) Pad sample was compressed to 50% thickness (1.5 mm) with compression tool and spacer.
3) Sample was put into aging chamber. After aging, sample was taken out.
4) Pad sample was released after it returned to room temperature, and the thickness 60 minutes later was measured.
| Grade | Thermal conductivity W/m?K |
Thermal resistance cm2?K/W |
|---|---|---|
| ISO22007 | 50°C/100 psi ASTM D5470 | |
| TC-100PEN3-10 | 3.1 | 1.56 |
| TC-100PEN5-20 | 5.2 | 0.95 |
For drawing heat away from electronic components used in automobiles and industrial machinery.
| Grade | Thermal conductivity W/m?K | Thermal resistance cm2?K/W |
|---|---|---|
| ISO22007 | 50°C/100 psi ASTM D5470 | |
| TC-FORS-2-40 | 1.9 | 2.77 |
Test Method
Physical properties were measured after immersing samples in automatic transmission fluid for a specified period at 150°C.
Sample
TC-200FORS-2-40
Immersion Time h |
0 | 1000 |
| - |  |
|
Density 23°C cm3 |
3.18 | 3.26 |
Hardness Asker C |
38 | 59 |
Thickness mm |
2.00 | 2.01 |
Dielectric Breakdown Voltage In oil kV |
28.0 | 28.0 |
Thermal Conductivity W/m?K |
1.94 | 1.95 |
These products are not suitable for use with all solvents.
Be sure to test to check compatibility with particular oils and fluids before use.
